When your AC stops cooling in Hollywood, Florida, it's not just uncomfortable — it can become a genuine health risk within hours. Broward County summers push heat indexes well above 100°F, and the humidity alone can make an uncooled home feel unbearable. If your system is running but the air coming out feels warm, or if the unit isn't turning on at all, something in the cooling chain has broken down — and the fix isn't always obvious.
Hollywood homeowners face a specific set of challenges that make AC problems more common here than in many other parts of the country. Salt air from the Atlantic accelerates coil corrosion, the near-constant runtime from May through October wears components faster, and older homes in neighborhoods like West Hollywood, Liberia, and the Boulevard corridor often have aging ductwork and undersized original equipment. Understanding what's failing — and why — is the first step to making a smart decision.
This guide walks you through the most common reasons an AC stops cooling in the Hollywood area, what you can check on your own, what requires a licensed technician, and how to know when repair no longer makes financial sense and replacement is the smarter move.
Start Here: Quick Checks Before You Call Anyone
Before assuming the worst, run through these basic checks. They cost nothing and occasionally solve the problem entirely.
**Thermostat settings:** Make sure the thermostat is set to COOL, not FAN only. A system blowing uncooled air is sometimes just set wrong after a cleaning visit or power blip.
**Air filter condition:** A clogged filter can restrict airflow so severely that the evaporator coil freezes over, stopping all cooling. Pull the filter out — if it looks like a solid gray mat, that's your problem. Replace it, turn the system off for 2–3 hours to let the coil thaw, then restart.
**Circuit breakers:** Check your panel for a tripped breaker labeled AIR HANDLER or CONDENSER. Florida's frequent thunderstorms can trip breakers without obvious signs. Reset once if tripped, but if it trips again immediately, stop — there's an electrical fault that needs a pro.
**Condensate drain line:** Hollywood's humidity means your AC pulls significant moisture from the air. If the drain line clogs, a float switch shuts the system down to prevent water damage. Check for standing water in the drip pan under the air handler.
**Outdoor unit clearance:** Walk outside and look at your condenser. Is it running? Is it surrounded by overgrown shrubs or debris? The condenser needs 18–24 inches of clearance on all sides to reject heat effectively.
The Most Common Causes of AC Failure in Hollywood, FL
If the quick checks didn't solve it, one of these is likely the culprit.
**Low refrigerant (Freon/R-410A):** Refrigerant doesn't get used up — if it's low, there's a leak somewhere. Signs include ice forming on the copper lines, a hissing sound, or the system blowing slightly cool but never reaching setpoint. This requires a licensed EPA 608-certified technician to diagnose and repair.
**Dirty evaporator or condenser coils:** Hollywood's coastal environment means salt and airborne particulates coat coils faster than in inland areas. Dirty coils reduce heat transfer efficiency dramatically. This often looks like the system running constantly without reaching temperature.
**Failed capacitor or contactor:** These small electrical components are among the most common failures in South Florida. A bad capacitor means the compressor or fan motor won't start. Contactors wear out from the near-continuous cycling demands of Broward County summers. Both are relatively inexpensive parts but require a licensed HVAC technician to replace safely.
**Compressor failure:** The compressor is the heart of the system. When it fails, there's no cooling at all. Compressor failure is often the economic tipping point where replacement makes more sense than repair — especially on a system over 10 years old.
**Ductwork leaks:** Many Hollywood homes, particularly those built in the 1960s through 1980s, have flex duct in attics that has degraded, disconnected, or was never properly sealed. If conditioned air is leaking into your attic instead of your living space, the system will run endlessly without cooling the home.
What SEER2 Ratings Mean for Hollywood Homeowners
If your AC is 10 or more years old and needs a significant repair, understanding efficiency ratings helps you evaluate your options clearly.
As of January 2023, all new residential AC systems sold in the Southeast must meet a minimum SEER2 rating of 15.2 for split systems. SEER2 (Seasonal Energy Efficiency Ratio 2) uses a updated testing protocol that better reflects real-world installation conditions than the old SEER standard.
For Hollywood homeowners served by Florida Power & Light (FPL), efficiency matters enormously. A home running a 10-year-old 10 SEER system versus a new 16–18 SEER2 unit can see meaningful reductions in cooling energy consumption — and in a climate where AC runs 10–11 months a year, those savings compound quickly.
FPL has historically offered rebate programs for high-efficiency equipment. While specific rebate values and eligibility requirements change, it's worth asking any contractor you work with whether current FPL rebates apply to the system being quoted. Always verify directly with FPL before factoring rebates into your decision.
For a typical Hollywood home between 1,500 and 2,500 square feet, a properly sized system will fall somewhere between 2.5 and 4 tons (30,000–48,000 BTU). Oversizing is a common mistake that leads to short cycling, poor humidity control, and premature wear — all serious problems in a coastal climate where relative humidity regularly exceeds 80%.
The Repair vs. Replace Decision: A Practical Framework
The hardest part of an AC problem isn't diagnosing it — it's deciding whether to repair or replace. Here's how to think through it honestly.
**System age:** The average lifespan of a central AC system in South Florida is 12–15 years, shorter than the national average due to near-constant runtime and salt air exposure. If your system is 12+ years old, even a successful repair is borrowing time.
**The 50% rule:** If the cost of a repair exceeds 50% of the cost of a new system — particularly on a unit that's already past its mid-life — most HVAC professionals recommend replacement. You're essentially investing heavily in aging infrastructure.
**R-22 refrigerant systems:** If your system still uses R-22 (Freon), the refrigerant itself was phased out of production in 2020. Recharging an R-22 system means using recovered refrigerant, which is expensive and increasingly scarce. Any R-22 system still in service in Hollywood is overdue for replacement.
**Comfort and humidity issues:** A system that's struggling to maintain setpoint or leaving your home feeling clammy even when it's running may be undersized, improperly charged, or have duct issues. These are systemic problems that repair alone may not solve.
Before making any decision, make sure a technician has given you a written diagnosis — not just a quoted repair price. You need to know exactly what failed and why before evaluating options.
Permits and Inspections for AC Replacement in Broward County
If you do move forward with a system replacement in Hollywood, understanding the permit process protects you legally and practically.
In Broward County, AC replacements require a mechanical permit pulled by a licensed contractor. Hollywood's Building Services Division processes these permits, and work must be inspected before it's considered complete. This is not optional — unpermitted AC work can create complications when you sell your home, may void manufacturer warranties, and leaves you without recourse if the installation is done incorrectly.
A legitimate licensed HVAC contractor will pull the permit for you as part of the job. If a contractor suggests skipping the permit to save money or time, that's a red flag.
The inspection process in Hollywood typically involves a rough-in inspection (if new line sets or electrical work is involved) and a final inspection once the system is running. Your contractor should schedule these and be present for them. The timeline from permit application to final inspection varies but is typically 1–3 weeks for straightforward replacements.
Make sure your contractor provides you with the closed permit and final inspection record when the job is complete. File these with your home improvement records.
What Information You Need Before Getting a Replacement Quote
If you've determined replacement is likely the right path, gathering key information before you start collecting quotes leads to better, more comparable proposals.
Here's what matters:
**Your home's square footage and layout:** A proper Manual J load calculation — not a rule-of-thumb estimate — is the only reliable way to size a new system. Be wary of any contractor who quotes a system size without asking detailed questions about your home.
**Current system details:** Note the brand, model number, and age of both the air handler and condenser. These are usually on a data plate on each unit. Also note the refrigerant type (R-410A or R-22).
**Ductwork condition:** If your ducts are original to a home built before 1990, ask whether duct testing or replacement should be part of the quote. New equipment on leaky ducts performs poorly.
**Electrical panel capacity:** New high-efficiency systems sometimes require a dedicated 240V circuit. Know your panel's current capacity and whether it was recently updated.
**FPL account information:** If you want to explore whether current utility rebates apply to your replacement, have your FPL account number handy when speaking with contractors.
Having this information organized before you engage contractors puts you in a much stronger position to evaluate proposals accurately and avoid oversights.
Frequently Asked Questions
Why is my AC running but not cooling my Hollywood home?
The most common reasons are a frozen evaporator coil (usually from a clogged filter or low refrigerant), a failed capacitor preventing the compressor from starting properly, dirty condenser coils reducing heat rejection, or ductwork leaks dumping conditioned air into the attic. Start with the filter and circuit breaker, then call a licensed technician if those checks don't reveal the problem.
How long should an AC system last in Hollywood, FL?
In Hollywood and greater Broward County, most central AC systems last 12–15 years. That's shorter than the national average of 15–20 years because South Florida systems run nearly year-round, and the coastal salt air accelerates coil corrosion. Consistent maintenance — particularly annual coil cleaning and filter changes every 1–2 months — extends system life.
Does AC replacement in Hollywood require a permit?
Yes. All AC replacements in Hollywood require a mechanical permit through Broward County's building department. A licensed contractor pulls the permit and schedules inspections. Never allow a contractor to skip the permit process — unpermitted work creates serious problems when selling your home and may void your equipment warranty.
My AC uses R-22 refrigerant. Can it still be repaired?
Technically yes, but it's increasingly expensive and impractical. R-22 production was banned in the U.S. as of January 2020, so any refrigerant available now is recovered or recycled stock — and prices have risen sharply. Most HVAC professionals in Hollywood will recommend replacing an R-22 system rather than recharging it, especially if the system is already 12+ years old.
What size AC system does a Hollywood, FL home need?
System sizing depends on your specific home — square footage, ceiling height, insulation levels, window area, and sun exposure all factor in. A proper Manual J load calculation is the only accurate way to determine the right size. For reference, homes between 1,500 and 2,500 square feet in Broward County typically need between 2.5 and 4 tons, but don't let any contractor size a system without measuring your home first.
Are there FPL rebates available for AC replacement in Hollywood?
Florida Power & Light has historically offered rebates for qualifying high-efficiency HVAC equipment in their service territory, which includes Hollywood. Rebate programs, eligibility requirements, and amounts change periodically. Ask your contractor whether current FPL rebates apply to the system being quoted, and verify details directly with FPL before factoring any rebate into your budget.
How do I know if I should repair or replace my AC in Hollywood?
Consider three things: system age, repair cost, and refrigerant type. If the system is over 12 years old, still uses R-22, or the repair cost exceeds roughly half what a new system would cost, replacement usually makes more financial sense. A licensed technician should give you a written diagnosis before you decide — not just a repair quote.
Get a Saved Intake Started — Know Your Options Before Committing to Anything
Whether you're facing a repair decision or starting to explore replacement, our free saved intake captures the details about your home and current system so you can review real options at your own pace. Start your intake now and have the information you need ready before the next conversation.
Start the 5-minute intake