Skip to main content
Clearwater, FL

New HVAC in Clearwater.

Clearwater sits between the Gulf and Tampa Bay — peninsula geometry keeps dew points high from May through October. Variable-speed equipment dehumidifies at partial load here better than single-stage systems short-cycling on afternoon peaks, so the intake pays close attention to humidity goals and duct access. Our crew is routed to Pinellas County by ZIP — DBPR-certified, insured, and permitted through the local authority.

Pinellas County

What we install in Clearwater.

Heat pumps for FL humidity.

Modern heat pumps handle Florida's year-round humidity load better than straight-cool systems. We size every unit with Manual J — no tonnage guessing.

Variable-speed AC for hot summers.

Central Florida summers demand variable-speed compressors that modulate instead of cycling hard. Min SEER2 requirement: 15 SEER2.

Hurricane-grade install standards.

Every outdoor unit is mounted and anchored to Florida wind-load code. We pull the permit, schedule the inspection, and document it.

Local crews

A licensed crew assigned by county.

Clearwater's housing stock splits three ways: 1950s ranch homes on the bluff near the Sound, 1980s condos on Sand Key and Island Estates, and the dense 2000s rebuild west of US-19. Each one wants a different sizing conversation — slab-on-grade ranches with original returns, high-rise condo chases with building-spec limits, and tight post-Andrew stucco envelopes that overheat with an oversized unit. Duke Energy eligibility is reviewed after the saved intake identifies the home and equipment path.

Every install in PinellasCounty runs through a DBPR-certified contractor routed by ZIP. License numbers are shared at purchase — not after. You see who's coming before any payment is made.

Florida DBPR Certified · CAC1822797 · CFC050548 · Verify license

Local particulars

What matters only in Clearwater.

Permit in Clearwater

3–5 business days from pull to final inspection. Pulled with City of Clearwater Building & Development Services (or Pinellas County Building Services for unincorporated addresses — Belleair, Belleair Bluffs, and parts of the Beach).

Utility — Duke

Duke Energy Florida may offer incentives on qualifying high-efficiency installs. Eligibility is reviewed after intake and tied to the saved customer record.

Ductwork in Clearwater

Clearwater ductwork has two recurring problems. Pre-1970 block-construction homes on the bluff often have original metal trunks with failed interior liners, where the metal looks intact but the R-value is long gone. Post-1985 stucco homes west of US-19 run flex in unconditioned attics that has been baked for decades and crushes at the boot-to-register connection. Both get checked before we finalize a tonnage — a leaky plenum can burn 10–15% of your capacity before the register even sees it.

Rebates Clearwater

Florida rebates available in Clearwater.

Rebate eligibility in Clearwater depends on your utility territory, equipment tier, and address-level program availability. Duke Energy Florida territory covers most of Pinellas County, but program terms change — we check actual eligibility after your intake is saved.

We won't advertise a rebate number before we know your home. Once the intake is complete, the install desk reviews what's actually available for your ZIP, equipment path, and purchase tier.

The crew that shows up

Hales AC in Clearwater.

Hales AC routes replacement requests across Pinellas, Hillsborough, Pasco, Manatee, and Sarasota. RITA saves the home facts first, then the install desk builds the quote path.

DBPR · CAC1822797 · CFC050548 · More about Hales AC

4.6917 Google reviews
  • in the last week

    Amazing service, completed Maintenance thorough job and knowledgeable tech!! Highly recommend

    Greg Riofrio

  • in the last week

    1. The wrong condensing unit was installed—a Merit instead of the Elite model specified in my contract. If I hadn’t checked the unit’s tag myself, this expensive mistake would have gone unnoticed for the unit’s entire lifespan. Although the correct unit was eventually installed, no explanation was ever given for the error. Caveat emptor. 2. After installation, my credit card was charged multiple times for the $15,200 cost. I had to call Hale’s office repeatedly to reverse the extra charges. No one explained why this happened, and it was only resolved because I followed up myself. 3. For a month after installation, I called every few days requesting an invoice listing the installed equipment’s model and serial numbers, along with a copy of the permit, to apply for a Duke Energy rebate. This simple request proved difficult. After a month of persistence, I received an invoice without serial numbers. I eventually found the permit online myself. The office seems unable to handle non-routine requests or follow through accurately. 4. After a month, I called three times asking for management to contact me regarding these issues and the installation itself. No one ever got back to me. 5. Permitting was complicated by two major hurricanes in Fall 2024, requiring a permitting official to visit my home multiple times due to repeated inspection failures. The last failure was due to the technician not checking a box on the AHU sticker indicating the heat strip type. It would have been helpful to be notified when installation was approved, as requested—I wrongly assumed it was. About a month ago, I received a letter from the City of Seminole stating the permit had expired and the installer might be reported to the state licensing office. I informed Hale's, and only then did they arrange for the permitting official to return and finalize the inspection—well over a year after the initial installation. This would not have happened if I hadn’t reported the letter. 6. In December, I was called to renew my service contract on all three systems in my home (all installed by Hale’s), but the free preventive maintenance contract offered with the new unit was not honored. Neither I nor the representative could explain why. I pointed out that the new unit didn’t require maintenance yet, and was still under warranty. I asked to have someone check with management and respond, but received no follow-up. 7. More recently, after voicemails about owing money for preventive maintenance, I called again and learned that Hale’s wanted to charge me in advance for this year’s maintenance on all three systems. The person I spoke to—who had previously promised to look into the free maintenance—had no record of our earlier conversation, and still couldn’t answer my question. I decided not to continue servicing my units with Hale’s and informed them. To be fair, the installation and maintenance crews were courteous, aside from the error with the wrong unit. My main concern is the repeated mistakes and persistent lack of accurate information from the company, which led me to end the relationship. The inability to reach a manager when requested is a major red flag, reflecting either poor phone representative training or an unwillingness from senior management to engage with customer issues. The number of messages left without a response became way too egregious despite my extreme patience. Out of town ownership too focused on profits. Note: Hale’s is listed as a Lennox Premier dealer on Lennox’s corporate website, but I suspect that rating reflects past ownership’s performance. For new customers, I strongly recommend proceeding with caution, double-checking their work, or even shopping around for providers with better recent reviews regarding service and communication. I think I was more than fair in allowing them to respond appropriately but it did not happen.

    Robert Landis

  • a week ago

    This has been a very bad experience. This ac unit is less than a year old. It's been leaking since it was put in. They put in a new condenser coil and smashed all the metal fins all the way around the top. The tech testing for leaks over pressurize until it blew off the gauges. Now it needs a new coil. The air handler is saturated with water. Float wires were hanging in the water. It's completely rusted and corroded. The supervisor told me it's OK to put in a new coil with all that wetness. The electrical part of the handler is also wet and shows corrosion on all the parts. I told the manager Caitlin that I wanted a new air handler, she told me 'that's not how this works". I called Daikin and they said that is corrosion when the supervisor from Hales said it's from the manufacturer. I called goodman and they said wet insulation is not "ok". The city inspector said not to let them back into the home. Paid almost $14000. The insulation is still wet after 2 months of not working. In the picture it shows a brand-new coil that they were going put it in and I said no.

    deann

View all Hales AC reviews on Google →
On the ground

What we know about Clearwater.

Licensed HVAC technician installing a condenser near Clearwater, FL

Field crew · Clearwater

Licensed · Insured · Local

Clearwater's housing stock splits three ways: 1950s ranch homes on the bluff near the Sound, 1980s condos on Sand Key and Island Estates, and the dense 2000s rebuild west of US-19. Each one wants a different sizing conversation — slab-on-grade ranches with original returns, high-rise condo chases with building-spec limits, and tight post-Andrew stucco envelopes that overheat with an oversized unit. Duke Energy eligibility is reviewed after the saved intake identifies the home and equipment path.

Neighborhoods we service

  • Dunedin
  • Palm Harbor
  • Safety Harbor
  • Largo
  • Belleair
  • Oldsmar
Common questions

Clearwater homeowners ask us first.

When do I see AC quote details for my Clearwater home?

After the intake is saved. RITA starts with your Clearwater ZIP, home facts, equipment clues, comfort goals, and install constraints so the quote path belongs to an actual customer and home record instead of a public calculator page. Licensed crews still verify final fit, code requirements, and field conditions before install.

How fast can you install a new HVAC system in Clearwater?

Many Clearwater installs can move quickly once the intake, crew review, equipment path, permit, and schedule are confirmed. Straightforward replacements are usually faster than projects with ductwork, electrical, access, HOA, or specialty-equipment constraints.

What size HVAC do I need for a Clearwater home?

Size depends on your home's square footage, insulation, orientation, and ductwork — not a "1 ton per 500 sqft" rule of thumb. Clearwater's Central Florida climate zone averages high humidity and long cooling seasons, so we run a real Manual J load calculation on every job and typically land 0.5 ton smaller than what walk-in contractors quote — which is exactly what keeps your house comfortable instead of clammy.

Are NewHVACDeals installers licensed in Pinellas County?

NewHVACDeals LLC holds Florida DBPR certifications CAC1822797 (Class A Air Conditioning Contractor) and CFC050548 (Plumbing Contractor). The intake and confirmation path identifies the operating install desk or partner contractor for the actual address before booking, and work that requires a permit is handled by a properly licensed and insured crew. Verify CAC1822797 and CFC050548 on the DBPR public licensee search at myfloridalicense.com.

Which Clearwater neighborhoods do you service?

We check serviceability by ZIP first across Pinellas County and nearby Dunedin, Palm Harbor, Safety Harbor, Largo, and more. Anchor ZIPs we see often include 33755, 33756, 33759. If your ZIP is not listed on /ac-installation, call us at (813) 217-3600 and we will confirm coverage before the quote path is shown.

Who handles permits and inspection for an AC replacement in Clearwater?

The install desk flags the permit path before booking and coordinates with City of Clearwater Building & Development Services (or Pinellas County Building Services for unincorporated addresses — Belleair, Belleair Bluffs, and parts of the Beach) when the saved address and final scope require it. In Clearwater, that means planning around 3–5 business days from pull to final inspection where the address and scope require it. The homeowner should not have to guess which municipality, county office, HOA, or condo association has to approve the work before the crew arrives.

Can utility incentives apply to a Clearwater AC replacement?

Duke Energy Florida eligibility is reviewed after the intake is saved because incentive rules depend on the address, equipment match, efficiency rating, documentation, and installation scope. Public pages can explain the review process, but the actual eligibility path belongs to the saved customer and home record.

How do I know whether to repair or replace an older AC in Clearwater?

The decision starts with age, refrigerant type, comfort complaints, repair history, humidity control, duct condition, and whether the outdoor unit is surviving Florida runtime and weather exposure. For Clearwater, that includes this local ductwork reality: Clearwater ductwork has two recurring problems. Pre-1970 block-construction homes on the bluff often have original metal trunks with failed interior liners, where the metal looks intact but the R-value is long gone. Post-1985 stucco homes west of US-19 run flex in unconditioned attics that has been baked for decades and crushes at the boot-to-register connection. Both get checked before we finalize a tonnage — a leaky plenum can burn 10–15% of your capacity before the register even sees it. RITA captures those clues first so the install desk can separate a simple repair conversation from a replacement path that actually fits the home.

Get a Clearwater-specific quote in 10 minutes.